VNA
[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz Latest HW Version 3.6 | HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart
Amazon Link
https://www.amazon.com/gp/product/B07Z5VY7B6/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&th=1
About this item
[2022 UPGRADED HW V3.6] NEW HW VERSION: V3.6 with MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable( original PCB needs OTG cable), see a clear HD image on your phone. Added a case, which is protective and dust-proof. Disply: 2.8 inch TFT (320 x240)
[IMPROVED FREQUENCY ALGORITHM: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
[MULTIPLE FUNCTIONS] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software
[STRONG AND SECURE POWER SUPPLY] This VNA is battery powered or USB powered; Built in 650mAh battery, could work for 2 hours continuously, if need extra working time, it can be connected to power bank or power source.
NOTE: Our nanovna is only compatible with low-speed and supports SPI mode SD card for now ; Package include NanoVNA host (with battery) display: 2.8 inch TFT x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1
RigExpert Stick 230 Blue
The analyzer is designed to measure the SWR (standing wave coefficient), return losses, and other parameters of cable and antenna systems in the range from 100 kHz to 230 MHz. It is the world's first antenna analyzer capable of 16 hours of continuous measurement without recharging the battery. A small, convenient and powerful vector network analyzer is designed for measuring the most useful parameters of cable and antenna systems. You get a smaller size, less weight you carry, less time to measure.
Small. Handy. Powerful.
The analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
The following tasks are easily accomplished by using this analyzer:
Rapid check-out of an antenna in the field or stationary conditions.
Tuning an antenna to resonance.
Comparing characteristics of an antenna before and after a specific event (rain, hurricane, etc.).
Measuring capacitance or inductance of reactive loads.
SPECIFICATIONS:
Frequency Range: 0.1 to 230 MHz
Frequency Entry: 1 KHz Resolution
Measurement For: 25, 50, 75, 100, 150, 200, 300, 450, and 600-Ohm systems
SWR Measurement Range: 1 to 100 in numerical modes, 1 to 10 in chart modes
R and X Range: 0…10000, -10000…10000
Display Modes:
SWR, return loss, R, X, Z, L, C, Magnitude and Phase Angle at single frequency.
SWR chart, 100 points.
SWR chart at fixed HAM bands by IARU Regions, 100 points.
Multé mode – to check your multiband antenna promptly.
RF output:
Connector type: UHF (SO-239).
Output signal shape: square, 0.1 to 230 MHz.
Output power: -10 dBm (at 50 Ohm load).
Power:
One 3.7V Li-Ion battery, type 18650
When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface:
200×200 monochrome e-paper display
2×3 keys on the water-proof keypad
English menus and help screens
USB connection to a personal computer
Bluetooth: v.4.2 BLE Single-mode, Class B
Dimensions: 185 mm x 40 mm x 33 mm (7,3 in x 1,6 in x 1,3 in)
Operating temperature: 0…40 °C (32…104 °F)
Weight: 185 g (6,5 Oz) with battery
Warranty: 2 years
GTIN-13: 4820185420259
RigExpert Stick 230 - Inside The Box
RigExpert Stick 230 Antenna Analyzer (with a Li-ion Battery Type 18650)
Quick Start Guide
Neck Strap
USB Cable